US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Instrukcja Użytkownika Pobierz pdf (Strona 28)

USRobotics

Command Reference

Data Command Set - 20

0 Reports Caller ID with formatted presentation to the DTE. The

modem presents the data items in a <Tag><Value> pair format.

The expected pairs are date, time, name, and caller code

(telephone number),

1 Reports Caller ID with unformatted presentation to the DTE.

Reporting Supported Range of Parameter Values

Command: +VRID=?

Response: +VRID: (<pmode> range)

Example: +VRID: (0,1)

\N - Operating Mode

This command controls the preferred error correcting mode to be negotiated in a

subsequent data connection.

Syntax

\N<mode>

Defined Values

<mode> Decimal number which corresponds to the selected mode.

0 Selects normal speed buffered mode (disables error-correction

mode) and forces &Q6 (selects asynchronous operation in

normal mode.)

1 Same as \N0.

2 Selects reliable (error-correction) mode and forces &Q5 (the

modem will try to negotiate an error corrected link). The modem

will first attempt a LAPM connection and then an MNP

connection. Failure to make a reliable connection results in the

modem hanging up.

3 Selects auto reliable mode and forces &Q5 (the modem will try to

negotiate an error corrected link). This operates the same as \N2

except failure to make a reliable connection results in the modem

falling back to the speed buffered normal mode.

4 Selects LAPM error-correction mode and forces &Q5 (the modem

will try to negotiate an error corrected link). Failure to make an

LAPM error-correction connection results in the modem hanging

up.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 157 158

Brak uwag

US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Instrukcja Użytkownika Strona 28