US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Instrukcja Użytkownika Strona 96

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 158
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 95
USRobotics
Command Reference
Data Command Set - 88
-QCPC - Force Full Startup Procedure Next Connection
This command causes the modem to use full startup procedures on the next
connection attempt regardless of the setting of the +PQC command. After this
attempt, the modem will select the startup procedure as defined by the +PQC
command. If a shortened startup procedure is enabled by the +PQC command,
then the quick connect profile will also be updated on the next connection attempt.
Syntax
-QCPC
Result Code
OK In V.92 Mode (+MS=V.92)
ERROR Otherwise
-QCPS - Enable Quick Connect Profile Save
This command controls whether or not the modem will save the generated quick
connect profile.
Syntax
-QCPS=<value>
Defined Values
<value> Decimal number corresponding to the desired operation. 0 Do not
allow the quick connect profile to be saved. 1 Allow the quick
connect profile to be saved. (Default.)
Result Codes
OK 0 or 1 in V.92 Mode (+MS=V.92) and quick connect is enabled
(+PSS = 0)
ERROR Otherwise
Reporting Selected Value(s)
Command: -QCPS?
Response: -QCPS: <value>
Example: -QCPS: 1 For the default setting.
Reporting Supported Range of Parameter Values
Command: -QCPS=?
Response: -QCPS: (<value> range)
Przeglądanie stron 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 157 158

Komentarze do niniejszej Instrukcji

Brak uwag