US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Instrukcja Użytkownika Pobierz pdf (Strona 24)

56K Softmodem

Command Reference

- 18

Table 3-18: X<value> Commands

Y<value>—Long-Space Disconnect

This command is supported to ensure compatibility with communication software

that issues the Y0 command.

Long-space disconnect is always disabled.

Result codes:

OK if <value> = 0.

ERROR if <value> does not equal 0.

Table 3-19: Y<value> Commands

Z<value>—Reset and Recall Stored Profile

Use this command to force the 56K Softmodem to go on-hook and restore a

profile saved by the &W command. The 56K Softmodem has two stored profiles

and the active profile. The <value> parameter selects the stored profile to copy

into the active profile.

Command Description

X0 Busy detection is disabled; blind dialing (no dial tone detection) is enabled. The following result

codes are supported: • OK • CONNECT • RING • NO CARRIER • ERROR

X1 Busy detection is disabled; blind dialing (no dial tone detection) is enabled. The following result

codes are supported: • OK • RING • NO CARRIER • ERROR • CONNECT <RATE>

X2 Busy detection is disabled; blind dialing is disabled. The dialing cannot be conducted unless a dial

tone is detected. If dial tone is not detected within the time specified by register S6, the NO DIAL-

TONE result code will be reported. The following result codes are supported: • OK • RING • NO

CARRIER • ERROR • NO DIALTONE • CONNECT <RATE>

X3 Busy detection is enabled; blind dialing is enabled. The following result codes are supported: • OK

• RING • NO CARRIER • ERROR • BUSY • CONNECT <RATE> • BLACKLISTED

X4 Busy detection is enabled; blind dialing is disabled. The dialing cannot be conducted unless a dial

tone is detected. If dial tone is not detected within the time specified by register S6, the NO DIAL-

TONE result code will be reported. The following result codes are supported: • OK • RING • NO

CARRIER • ERROR • NO DIALTONE • BUSY • CONNECT <RATE> • DELAYED • BLACKLISTED

• WARBLE • CALL WAITING DETECTED

X5 Busy detection is enabled; blind dialing is disabled. The dialing cannot be conducted unless a dial

tone is detected. If dial tone is not detected within the time specified by register S6, the NO DIAL-

TONE result code will be reported. The following result codes are supported: •

OK • RING • NO

CARRIER • ERROR • NO DIALTONE • BUSY • CONNECT <RATE> • RRING • NO BONGTONE •

DELAYED • BLACKLISTED • WARBLE • CALL WAITING DETECTED

Command Function

Y0 Disabld long-space disconnect (default).

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 107 108

Brak uwag

US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Instrukcja Użytkownika Strona 24